Operation Manual

ManualsBrandsPowerplus ManualsSawPOWX0077LI

POWX0077LI EN

1 APPLICATION ................................................................................ 3

2 DESCRIPTION (FIG A) ................................................................... 3

3 PACKAGE CONTENT LIST ............................................................ 3

4 SYMBOLS ....................................................................................... 3

5 GENERAL POWER TOOL SAFETY WARNINGS ......................... 4

5.1 Working area .......................................................................................................... 4

5.2 Electrical safety ..................................................................................................... 4

5.3 Personal safety ...................................................................................................... 5

5.4 Power tool use and care ........................................................................................ 5

5.5 Service .................................................................................................................... 5

6 MACHINE-SPECIFIC SAFETY WARNINGS .................................. 5

7 ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND

CHARGERS .................................................................................... 6

7.1 Batteries ................................................................................................................. 6

7.2 Chargers ................................................................................................................. 6

8 ASSEMBLY ..................................................................................... 6

8.1 Install or remove the saw blade (Fig 1) ................................................................ 6

9 OPERATION.................................................................................... 7

9.1 Charging the battery pack (Fig. 2) ........................................................................ 7

9.1.1 Charging indication .................................................................................................. 7

9.2 Inserting and removing the battery (Fig. 3) .......................................................... 7

9.3 Switch on/off (Fig. 4).............................................................................................. 7

9.4 To change position of the pivot shoe assembly (Fig 5) ...................................... 7

9.5 General cutting ...................................................................................................... 7

9.6 Plunge cutting ........................................................................................................ 8

9.7 Metal cutting .......................................................................................................... 8

10 CLEANING AND MAINTENANCE ................................................. 8

10.1 Cleaning ................................................................................................................. 8

11 TECHNICAL DETAILS .................................................................... 8

12 NOISE .............................................................................................. 8

Summary of content (10 pages)

PAGE 1
POWX0077LI EN 1 APPLICATION ................................................................................ 3 2 DESCRIPTION (FIG A) ................................................................... 3 3 PACKAGE CONTENT LIST............................................................ 3 4 SYMBOLS ....................................................................................... 3 5 GENERAL POWER TOOL SAFETY WARNINGS ......................... 4 5.1 Working area .............................
PAGE 2
13 POWX0077LI EN WARRANTY .................................................................................... 9 14 ENVIRONMENT .............................................................................. 9 15 DECLARATION OF CONFORMITY ............................................. 10 Copyright © 2013 VARO P a g e |2 www.varo.
PAGE 3
EN POWX0077LI RECIPROCATING SAW 18V POWX0077LI 1 APPLICATION The reciprocating saw is designed for cutting the wood, iron, nonferrous metals and plastics, using a standard saw blade. WARNING! Read this manual and general safety instructions carefully before using the appliance, for your own safety. Your power tool should only be passed on together with these instructions. 2 DESCRIPTION (FIG A) 1. 2. 3. 4. 5. 6.
PAGE 4
EN POWX0077LI Read manual before use "Class II - The machine is double insulated; Earthing wire is therefore not necessary (only for charger) Wear noise protection Ambient temperature 40°C max. (only for battery) Wear eye protection Use battery and charger only in closed rooms Wear a mask In dusty conditions Do not expose charger and battery pack to water Wear gloves Do not incinerate battery pack or charger 5 GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and instructions.
PAGE 5
EN POWX0077LI 5.3 Personal safety  Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool when you are tired or under the influence of drugs, alcohol or medication. A moment of inattention when operating a power tool may result in serious personal injury.  Use safety equipment. Always wear eye protection.
PAGE 6
EN POWX0077LI    Do not cut nails or screws unless you are using a blade specifically designed for this purpose. Inspect your material before cutting Before switching on the tool, be sure the blade in not contacting the work piece. Keep hands away from moving parts and on the top surface of the work piece. Do not place hands below work surface while saw is operating. 7 ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND CHARGERS 7.1      Batteries Never attempt to open for any reason.
PAGE 7
EN POWX0077LI 9 OPERATION 9.1 Charging the battery pack (Fig. 2) The battery pack for the reciprocating saw has been shipped in a low charge condition to prevent possible problems. You should charge them prior to use. Note: Batteries will not reach full charge the first time they are charged. Allow several cycles for the item to fully charge. The battery should only be charged indoors. After normal use, about 1 hour of charging time is required for the battery to be fully charged.
PAGE 8
EN POWX0077LI In general, coarser blades are for wood, plastics, and composites, and finer blades are for cutting metal. Chattering or vibration may indicate you need a finer blade or higher speed. If the blade overheats or clogs, it may indicate you need a coarser blade. Replace blades when they become dull. Dull blades will produce poor results and may overheat the saw. 9.6 Plunge cutting Clearly mark the line of cut, from a convenient starting point within the cut out area.
PAGE 9
POWX0077LI EN 13 WARRANTY                This product is warranted for a 36-month period effective from the date of purchase by the first user. This warranty covers all material or production flaws excluding : batteries, chargers, defective parts subject to normal wear & tear such as bearings, brushes, cables, and plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects resulting from maltreatment, accidents or alterations; nor the cost of transportation.
PAGE 10
EN POWX0077LI 15 DECLARATION OF CONFORMITY VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that, Product: Reciprocating saw Trade mark: POWERplus Model: POWX0077LI is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration.