Operation Manual

ManualsBrandsPowerplus ManualsToolPOWC3010

POWC3010 EN

1 APPLICATION .................................................................................. 2

2 DESCRIPTION (FIG.1) ..................................................................... 2

3 PACKAGE CONTENT LIST ............................................................. 2

4 SYMBOLS ........................................................................................ 2

5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 2

5.1 Working area ........................................................................................................... 3

5.2 Electrical safety ....................................................................................................... 3

5.3 Personal safety ....................................................................................................... 3

5.4 Power tool use and care ......................................................................................... 4

5.5 Service ..................................................................................................................... 4

6 SPECIFIC SAFETY INSTRUCTIONS FOR ANGLE GRINDERS ... 4

7 ASSEMBLY ...................................................................................... 5

7.1 Mounting the side-handle ....................................................................................... 5

7.2 Mounting the guard (Fig.2) ..................................................................................... 5

7.3 Mounting a grinding disc (Fig.3) ............................................................................ 5

7.4 Mounting grinding discs and roughing discs ....................................................... 6

8 OPERATION ..................................................................................... 6

8.1 Special attention when starting the machine ........................................................ 6

8.2 Switching On ........................................................................................................... 6

8.3 Switching Off ........................................................................................................... 6

9 USE ................................................................................................... 6

10 CLEANING & MAINTENANCE ........................................................ 6

10.1 Service ..................................................................................................................... 6

10.2 Cleaning................................................................................................................... 7

10.3 Lubrication .............................................................................................................. 7

11 TECHNICAL SPECIFICATION ........................................................ 7

12 WARRANTY ..................................................................................... 7

13 ENVIRONMENT ............................................................................... 8

Summary of content (8 pages)

PAGE 1
POWC3010 EN 1 APPLICATION .................................................................................. 2 2 DESCRIPTION (FIG.1) ..................................................................... 2 3 PACKAGE CONTENT LIST ............................................................. 2 4 SYMBOLS ........................................................................................ 2 5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 2 5.1 Working area .......................
PAGE 2
POWC3010 EN ANGLE GRINDER 500W 115MM POWC3010 1 APPLICATION This machine is developed for grinding and roughing of metal and stone. With help of the correct accessories the machine can also be used for brushing and sanding. It is not designed for commercial use. WARNING Read this manual carefully before using the machine, for your own safety. Your power tool should only be passed on with these instructions. 2 DESCRIPTION (FIG.1) 1. 2. 3. 4. 5.
PAGE 3
POWC3010 EN for future reference. The term "power tool" in the safety warnings refers to your mainsoperated (corded) power tool or battery-operated (cordless) power tool. 5.1 Working area  Keep working area clean and well lit. Untidy and dark areas can lead to accidents.  Do not operate power tools in potentially explosive surroundings, for example, in the presence of inflammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
PAGE 4
POWC3010 EN 5.4 Power tool use and care  Do not expect the power tool to do more than it can. Use the correct power tool for what you want to do. A power tool will achieve better results and be safer if used in the context for which it was designed.  Do not use the power tool if the switch cannot turn it on and off. A power tool with a broken switch is dangerous and must be repaired.  Disconnect the plug from the power source before making adjustments, changing accessories, or storing power tools.
PAGE 5
POWC3010       7 EN Ensure that mounted wheels and points are fitted in accordance with the manufacturer’s instructions. Ensure that blotters are used when they are provided with the bonded abrasive product and when they are required. If a guard is supplied with the tool never use the tool without such a guard. For tools intended to be fitted with threaded hole wheel, ensure that the thread in the wheel is long enough to accept the spindle length.
PAGE 6
POWC3010 EN 7.4 Mounting grinding discs and roughing discs Fig. 4 and 5 show how to mount the flange nut (9) when using thick (4 – 8 mm) and thin (2,5 – 4 mm) discs. 8 OPERATION 8.1 Special attention when starting the machine  Clamp the workpiece and make sure that the workpiece cannot slide from under the machine during the cutting activities.  When working with the machine, always hold it firmly with both hands and provide for a secure stance.
PAGE 7
POWC3010  EN If the connecting cable (or mains plug) is damaged, it must be replaced by a particular connecting cable which is available from our service department. Replacement of the connecting cable must only be carried out by our service department (see last page) or by a qualified person (qualified electrician). 10.2 Cleaning  Regularly clean the machine housing with a soft cloth, preferably after each use. Keep the ventilation slots free from dust and dirt.
PAGE 8
POWC3010   EN Your purchase receipt must be kept as proof of date of purchase. Your appliance must be returned undismantled to your dealer in an acceptably clean state, (in its original blow-moulded case if applicable to the unit), accompanied by proof of purchase. 13 ENVIRONMENT Should your machine need replacement after extended use, do not put it in the domestic waste but dispose of it in an environmentally safe way. Waste electrical products should not be disposed of with household waste.