Operation Manual

POWC2060 EN
Copyright © 2017 VARO P a g e | 6 www.varo.com
8.5 Metal cutting
Blades specifically designated for cutting metals must be used for this purpose. You may use
light oil as a coolant when cutting metal, this will prevent overheating of the blade, help the
blade cut faster, and promote longer blade life.
9 CLEANING AND MAINTENANCE
Attention! Before performing any work on the equipment, pull the power
plug.
9.1 Cleaning
 Keep the ventilation slots of the machine clean to prevent overheating of the engine.
 Regularly clean the machine housing with a soft cloth, preferably after each use.
 Keep the ventilation slots free from dust and dirt.
 If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
10 TECHNICAL DETAILS
Model nr.
POWC2060
Rated Voltage
220-240V
Rated Frequency
50Hz
Rated Power
710W
Rotation speed
0-2800min
-1
Protection classe
II
Cable length
2m
Max cutting depth
115mm
Carbon brush motor
Yes
Electronic speed control
yes
Cutting depth steel
5mm
Cutting depth wood
115mm
Adjustable pivot shoe
Yes
Quick change blades
Yes
Soft grip
Yes
Handle type
Fixed
11 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
82 dB(A)
Acoustic power level LwA
93 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration)
22.1m/s²
K = 1,5 m/s²