Operation Manual
POWC2030 EN
Copyright © 2017 VARO P a g e | 6 www.varo.com
8.2 Switching on and off (Fig. 5)
To switch on the circular saw, press the lock-off button (13) and pull the on/off switch
trigger (12).
To switch the tool off, release the on/off switch.
8.3 Dust extraction
A vacuum cleaner can be connected to the dust extraction connector, either directly to the
connector or using an adapter.
If necessary, connect an adapter to the connector (1).
Preferably use a vacuum cleaner for industrial use.
9 CLEANING AND MAINTENANCE
Attention! Before performing any work on the equipment, pull the power
plug.
9.1 Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use.
Keep the ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
9.2 Lubrication
From time to time, apply a drop of oil to the thread of the lock screw.
10 TECHNICAL DATA
Rated voltage
220-240V
Rated frequency
50 Hz
Rated power
1200W
Rotation speed
5800min
-1
Blade diameter
185 mm
Cable length
2 m
Max cutting depth
62.5 mm
Maximum cutting capacity 45°
52 mm
Carbon brush motor
Yes
Bore size
20mm
Adjustable angle
Yes
Number of teeth
24 T
Soft grip
Yes
Safety guard
Yes
External brush caps for faster carbon brush changes
Yes
Second handle type
Guide handle
Base material
Steel