Operation Manual

POW63655

5 OPERATION

5.1 Connect to power supply.

Connect the male plug of the cable to the mains power supply (230V – 50Hz).

Ensure that sufficient cable slack is available.

5.2 Mowing the lawn

 Mowing the lawn is important to maintain the thickness and the resilience of the grass.

 Mow your lawn regularly once a week, always set to the same cutting length (season:

March through to September). The recommended cutting length is between 3.5 cm

(minimum) and 5 cm (maximum). Once the grass has grown higher than 8 cm we

recommend mowing the lawn in stages.

 To further care for your lawn, use a special fertiliser and cut your lawn vertically at least

once a year in spring.

 Select a cutting length which is suitable for the actual length of the grass. Cut several

times so that a maximum 4 cm of grass is cut at any one time.

 Be sure to avoid lanes which might impair the free movement of the extension cord (% 7).

 Empty the grass bin (depending on the model either a grass box or a grass bag) as soon

as it is full. This helps avoid clogging of the ejection mouth (fig. 8).

 Be sure not to pass the mower over already cut grass left lying. This helps avoid clogging

of the ejection mouth and prevents unnecessary stress on the motor.

6 TECHNICAL DATA

type

POW63655

Power supply 230V~ 50Hz

Power consumption 1700W

No load speed 2800min-1

Cutting width (mowing circle) : 460mm

Cutting heights 25/31/37/43/50mm

(5 positions )

Grass box capacity 38 L

Net weight : 22.0 kg

7 SOUND EMISSION

Noise emission values measured according to relevant standard.

LpA (Sound pressure level) : 67 dB(A) K = 3 dB(A)

LwA (Sound power level) : 93 dB(A) K = 3 dB(A)

ATTENTION ! The sound power pressure may exceed 85 dB(A), in this case

individual hearing protection must be worn.

aw (Vibration) : 1.9 m/s² K = 1.5 m/s²