User Manual

POW4820-POW4830(SC) EN

§ Shake the generator several times to make the float rise if the generator cannot start after

adding oil for the first time and the oil alarm indicator stays on when pulling the starting

grip.

§ Make sure there is no spilled fuel around the spark plug. Spilled fuel may ignite.

§ If the engine still doesn’t start, have the generator repaired by a licensed repair person.

Inspection:

§ Remove the spark plug rubber boot and clean any dirt from around the spark plug.

§ Remove the spark plug and place it in the spark plug rubber boot.

§ Connect the side electrode of the spark plug to the metal parts of the engine.

§ Pull the starting cord. A spark could jump across the gap.

The equipment that connects generator doesn’t start:

Spark plug works or

not?

Yes

Replace spark

plug.

Send the generator

to an authorized

dealer

Is the output

indicator on?

Is the overload

indicator on?

Does the

electrical

equipment work

when plugged

in directly?

Send the generator to an

authorized dealer.

Restart after turning off the

overload indicator.

Send the generator to an

authorized dealer.

Replace the electric equipment.

Repair the electric equipment.

Yes