User Manual

ManualsBrandsPowerplus ManualsGeneratorsPOW4820 POWER G ENERATOR 2000W DIGITAL EN

POW4820-POW4830(SC) EN

Check that the equipment to be connected is switch off. When the

equipment to be used is switched on, it will operate suddenly, and injuries

or accidents may be caused.

4. Switch on the equipment output indicator light will glitter (light). In case of overload

operation or when trouble occurs for the equipment being used, the output indicator light

(green) will go out, the overload indicator light (red) will light continuously, and no power

will be put out. At this time, the engine will not stop, so that the engine must be stopped

by setting the respective engine switch to STOP.

Fig 13 13.1 When overload or short circuited, overload indicator will illuminate (red)

13.2 Normal: output indicator will illuminate

When equipment requires a large starting power, the overload indicator

lights (red) and the output indicator light (green) may light together for a

short time, but this is no abnormality. After start of the equipment, the

overload indicator light (red) will go out and the output indicator light

(green) will stay lit.

AC Electric

lamps

Power tools Electromotor DC battery

Power factor 1 0.8-0.9 0.4-0.7

(Efficiency

0.85)

POW4820(SC) 1900 1520 760 Rated voltage 12V

Rated current 6A(for

Canada) 8A (except for

Canada)

POW4830(SC) 2500 2000 1000

8.6 DC applications

For charging 12V automotive batteries:

Idling

voltage (V)

Loading voltage

(V)

current (A)

Opening the smart throttle 22 12 6

Closing the smart throttle 27 13 8.5

DC Max. output power 37 13.5 8.5

The generator cannot sense a sensibility load with the same power which the manual

indicates. It only can sense 40%-70% power which the manual indicates.

Example:

Model POW4820(SC) POW4830(SC)

Generator rated output 1900VA 2500VA

Frequency Power factor

1.0 1800W 2300W

0.4~0.75 720W~1350W 920W ~ 1725W

96W

12V/8A

§ When using the DC output, turn Smart Throttle to the OFF position. The DC current will be

below 5A if turning on the Smart Throttle without AC current output.

§ When charging batteries, person must be present to monitor the voltage. Stop charging

when the voltage of the batteries is above 16V. Or it may cause battery explosion,

resulting in serious injury or death.