User Manual

ManualsBrandsPowerplus ManualsGeneratorsPOW4820 POWER G ENERATOR 2000W DIGITAL EN

POW4820-POW4830(SC) EN

1 DESCRIPTION (FIG 1) ..................................................................... 3

2 PACKAGE CONTENT LIST ............................................................. 3

3 SYMBOLS ........................................................................................ 4

4 GENERAL POWER TOOL SAFETY WARNINGS .......................... 4

4.1 Working area ........................................................................................................... 4

4.2 Electrical safety ....................................................................................................... 4

4.3 Personal safety ....................................................................................................... 4

4.4 Power tool use and care ......................................................................................... 5

4.5 Service ..................................................................................................................... 5

5 SAFETY INSTRUCTIONS ................................................................ 5

6 SAFETY LABEL LOCATIONS ........................................................ 6

7 PRE-OPERATION CHECK .............................................................. 6

7.1 Check the engine oil level. ..................................................................................... 6

7.2 Check the fuel level. ................................................................................................ 7

7.3 Check the air cleaner. ............................................................................................. 8

8 GENERATOR USE........................................................................... 8

8.1 Starting the engine .................................................................................................. 8

8.2 High altitude operation ........................................................................................... 9

8.3 Generator use .......................................................................................................... 9

8.3.1 Warning! ................................................................................................................... 9

8.4 AC applications ..................................................................................................... 10

8.5 Output and Overload Indicators. .......................................................................... 10

8.6 DC applications ..................................................................................................... 11

8.7 Start the engine ..................................................................................................... 12

8.8 Oil alert system ..................................................................................................... 12

8.9 Stopping the engine .............................................................................................. 12

9 MAINTENANCE ............................................................................. 13

9.1 Changing oil .......................................................................................................... 14

9.2 Air cleaner service ................................................................................................ 14

9.3 Spark plug servicing ............................................................................................. 15

Summary of content (20 pages)

PAGE 1
POW4820-POW4830(SC) EN 1 DESCRIPTION (FIG 1) ..................................................................... 3 2 PACKAGE CONTENT LIST............................................................. 3 3 SYMBOLS ........................................................................................ 4 4 GENERAL POWER TOOL SAFETY WARNINGS .......................... 4 4.1 Working area ........................................................................................................... 4 4.
PAGE 2
10 POW4820-POW4830(SC) EN TRANSPORTING AND STORAGE ............................................... 15 10.1 When transporting generator: .............................................................................. 15 10.2 Before storing the unit for an extended period: .................................................. 16 11 TROUBLESHOOTING ................................................................... 16 12 TECHNICAL DATA ......................................................................
PAGE 3
EN POW4820-POW4830(SC) DIGITAL GENERATOR 2000W / 2500W POW4820(SC) / POW4830(SC) WARNING! For your own safety, read this manual and the general safety instructions carefully before using the appliance. Your power tool should only be given to other users together with these instructions. 1 1. 2. 3. 4. 5. 6. 7. 8. 2 § § § § § DESCRIPTION (FIG 1) Fuel cap Air vent knob Choke knob Control panel Starting grip Fuel valve grip Maintenance cover AC socket 9. 10. 11. 12. 13. 14. 15. 16.
PAGE 4
EN POW4820-POW4830(SC) 3 SYMBOLS The following symbols are used in this manual and/or on the machine: 4 Denotes risk of personal injury or damage to the tool. Read manual before use. In accordance with essential safety standards of applicable European directives. Wear noise protection. GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and instructions. Failure to heed warnings and follow instructions may result in electric shock, fire and/or serious injury.
PAGE 5
EN POW4820-POW4830(SC) § § § § § Avoid accidental starts. Ensure the switch is in the off position before inserting the plug. Carrying power tools with your finger on the switch or plugging in power tools when the switch is in the on position makes accidents more likely. Remove any adjusting keys or spanners before turning on the power tool. A spanner or key left attached to a rotating part of the power tool may result in personal injury. Do not reach out too far.
PAGE 6
POW4820-POW4830(SC) § § § § § § § § § § § 6 EN Keep away from cigarette, smoke and sparks when re-fuelling the generator, Always refuel in a well ventilated location. Wipe up spilled gasoline at once. Connections for standby power to a building's electrical system must be made by a qualified electrician and must comply with all applicable laws and electrical codes. Improper connections can allow electrical current from the generator to back feed into the utility lines.
PAGE 7
POW4820-POW4830(SC) SAE Viscosity GradesPOW4830(SC) EN Single viscosity Multi viscosity Ambient Temperature Loosen the cover screw and remove the left side maintenance cover. Remove the oil filler cap, and wipe the dipstickk with a clean rag. Check the oil level by inserting the dipstick in the filler hole without screwing it in. If the oil level is below the end of the dipstick, refill the recommended oil up to the top of the oil filler neck.
PAGE 8
EN POW4820-POW4830(SC) 7.3 Check the air cleaner. Check the air cleaner element to be sure it is clean and in good condition. 1. Loosen the cover screw and remove the left side maintenance cover. 2. Press the latch tab on the top of the air cleaner body, remove the air cleaner cover, and check the element. 3. Clean or replace the element if necessary. Fig 6 6.1 Maintenance cover 6.2 Air filter body 6.3 Air filter cover 6.4 Air filter element Never run the engine without the air cleaner.
PAGE 9
POW4820-POW4830(SC) § EN Press the choke in completely after the engine is started. If the engine stops and will not restart, check the engine oil level before troubleshooting in other areas. Fig 9 9.2 Move to the right to deactivate Before using the device once it is connected, switch off the ECO switch. 8.2 High altitude operation At high altitude, the standard carburettor air-fuel mixture will be excessively rich. Performance will decrease, and fuel consumption will increase.
PAGE 10
EN POW4820-POW4830(SC) § § The DC receptacle can be used while the AC power is in use. If you use both at the same time, be sure not to exceed the total power for AC and DC. Most appliance motors require more than their rated wattage for start-up. 8.4 AC applications 1. Start the engine and make sure the output indicator light (green) illuminates. 2. Confirm that the appliance to be used is switched off, and plug in the appliance. Fig 11 11.2 Overload indicator light (red) 11.
PAGE 11
POW4820-POW4830(SC) EN Check that the equipment to be connected is switch off. When the equipment to be used is switched on, it will operate suddenly, and injuries or accidents may be caused. 4. Switch on the equipment output indicator light will glitter (light). In case of overload operation or when trouble occurs for the equipment being used, the output indicator light (green) will go out, the overload indicator light (red) will light continuously, and no power will be put out.
PAGE 12
EN POW4820-POW4830(SC) Fig 14 14.1 Charging wires § To prevent the possibility of creating a spark near the battery, connect charging cable first to the generator, then to the battery. Disconnect cable first at the battery. § Before connecting charging cables to a battery that is installed in a vehicle, disconnect the vehicles grounded battery cable. Reconnect the vehicle's grounded battery cable after the charging cables are removed.
PAGE 13
EN POW4820-POW4830(SC) § Turn the cap lever fully counter clockwise to the "OFF" position. Fig 8 8.2 Turn the fuel valve knob to the OFF position. Be sure both the fuel cap lever and the engine switch are in "OFF" position when stopping, transporting and/or storing the generator. Fig 17 Fig 17 17.1 17.2 Open Close Fig 17 17.3 Air vent knob 9 § § MAINTENANCE The purpose of the maintenance and adjustment schedule is to keep the generator in the best operating condition.
PAGE 14
EN POW4820-POW4830(SC) Fuel tank and filter Clean Fuel line Check n(3) Every 2 years (Replace if necessary) (3) NOTE: (1) Log hours of operation to determine proper maintenance. (2) Service more frequently when used in dusty areas. (3) These items should be serviced by an authorized dealer, unless the owner has the proper tools and is mechanically proficient. See the Shop Manual. Temperature (C°) Time for changing oil (hour) Recommended power factor 25 Normal 100% 30 18 95% 35 15 85% 40 12 70% 9.
PAGE 15
EN POW4820-POW4830(SC) § Reinstall the air filter parts after cleaning or replacing air filter element. Fig 6 6.1 Maintenance cover 6.2 Air filter body 6.3 Air filter cover 6.4 Air filter element 9.3 Spark plug servicing Please use high quality authentic spark plug. To ensure proper engine operation, the spark plug must be properly gapped and free of deposits. § Remove the bolts on the panel and the controlling panel. Fig 18 18.1 Top maintenance cover § Take out the ignition coil rubber boot. Fig 19 19.
PAGE 16
EN POW4820-POW4830(SC) § § Avoid a place exposed to direct sunlight when putting the generator on a vehicle. If the generator is left in an enclosed vehicle for many hours, high temperature inside the vehicle could cause fuel to vaporize resulting in a possible explosion. Do not drive on a rough road for an extended period with the generator on board. If you must transport the generator on board. If you must transport the generator on a rough road, drain the fuel from the generator beforehand. 10.
PAGE 17
EN POW4820-POW4830(SC) Yes Spark plug works or not? Replace plug. No spark No Send the generator to an authorized dealer § Shake the generator several times to make the float rise if the generator cannot start after adding oil for the first time and the oil alarm indicator stays on when pulling the starting grip. § Make sure there is no spilled fuel around the spark plug. Spilled fuel may ignite. § If the engine still doesn’t start, have the generator repaired by a licensed repair person.
PAGE 18
EN POW4820-POW4830(SC) There is no power in the direct current electric outlet: No Is the electric circuit breaker intact? Replace the electric circuit breaker. Yes 12 Send the generator to an authorized dealer. TECHNICAL DATA 12.1 Size and weight Type L x W x H (mm) Net weight (kg) POW4820(SC)-POW4830(SC) 570 x 320 x 510 26 12.
PAGE 19
POW4820-POW4830(SC) 13 § § § § § 14 EN WARRANTY. This product is warranted in accordance with legal regulations for a 24 months period effective from the date of purchase by the first user. This warranty covers all material or production failures, it does not include : defects from normal wear & tear parts, such as bearings, brushes, cables, plugs or accessories like drills, drill bits, saw blades etc. ;damage or defects resulting from abuse, accidents or alterations; nor the costs for transport.
PAGE 20
15 EN POW4820-POW4830(SC) POW4830(SC) DECLARATION OF CONFORMITY VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that, product : Digital generator 2000W / 2500W trade mark : POWERplus model : POW4820 – SC / POW4830 - SC is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration.