Operation Manual

POW1900 EN

 When mixing, wear proper personal protection measures for eyes, ears, hands and

breathing.

 This appliance is not suitable for mixing foodstuffs. The appliance cannot be adequately

cleaned in order to comply with hygiene regulations.

7 OPERATION

7.1 Preparation

Always unplug the machine from the mains before fitting a mixer bar.

 Screw the adaptor (1) clockwise into the mixer (2).

 Screw the mixer bar into the mixer spindle (3).

Always use a mixer bar that is suitable for the material to be mixed/stirred.

Using an unsuitable mixer bar can unnecessarily overload both the

machine and yourself.

 To remove the mixer bar, unscrew it from the mixer

spindle in an anticlockwise direction. The mixer bar can

become rather tight in the holder. In that case, use a spanner

to keep the holder from turning.

7.2 Switching on and off

 Switching on: Press the safety catch (5) and hold. Now you may press the on-off switch

(4) to start the mixer. Once it has started you may release the safety catch (5).

 Switching off: Release the on-off switch (4). The safety catch (5) will switch off by itself.

7.3 Variable speed selection

The speed can be increased gradually as

you turn the speed regulator (6) to a higher

number. The necessary speed depends on

the type of material you wish to mix. We

recommend practical testing to determine

the right speed.