Operation Manual

Step1:
Attachthefrontstabilizer(33)tothemainframe(1)withtwobolts(30),twocurvedwashers(31)and
twocapnuts(32).


Step2:
Removethefronttwoknobs(24)andtwoscrews(45)fromtherail.Attachtheseatsupport(18)tothe
rail(22).Attachthefronttwoknobs(24)totherail(22).
Attachtheconnectionplate(44)totherail(22)withthetwoscrews(45).
Note:pleasemakesurethecabledoesnotgettrapped.




Step3:
Attachtherearstabilizer(28)totherail(22)withthehexbolt(25),washer(17),knob(27)andnylonnut
(16).







22