Instruction Manual

To empty the Water Storage Box
1.
Put your hands on the positions as shown in the figure.
Use your thumb to press at the location shown. The
Water Storage Box opens with a “ka” sound. DO NOT
press too hard to prevent water from splashing out or the
device cracking.
2.
Carefully remove the Water Storage Box as shown in the
figure.
3.
After emptying and rinsing the Water Storage Box,
replace the device as shown in the figure.
4.
When the Water Storage Box is correctly aligned in
position, use your thumb to carefully push the device
inwards until a “ka” sound is heard, signifying that the
device is in place.