Instruction Manual

How to clean s
1. Release the ON/OFF Button. Switch off the wall socket and unplug the power
cable from the wall socket.
2. Before cleaning, please make sure the blades have stopped running.
3. Clean the Motor unit with a damp cloth. DO NOT immerse the Motor unit in water
or other liquids and avoid spraying water, in order to avoid damage or leakage.
4. Wash the Plastic Cup, Cup Cover, Rotor and
utensils before and after use with water &
detergent with a non-abrasive sponge to
avoid build-up of bacteria. Blades are sharp!
Dry the components with a soft, dry cloth.
DO NOT use a steel wire sponge, abrasive
cleaners or corrosive liquids such as
gasoline or acetone to clean the appliance &
accessories.
Never attempt to sterilise any part of this
appliance with hot water or steam by utilising
a steamer, frying pan, oven, microwave
oven, kettle, etc.
For more effective cleaning, you can apply a
proper amount of detergent and clean it with
a non-abrasive cleaning pad in warm water.
5. Ensure that the appliance & accessories are clean, dry, and placed in dry and
well-ventilated storage. Avoid direct sunlight.
6. Reassemble the Rotor into the Plastic Cup. Attach the Cup Cover onto the
Plastic Cup, making sure that the Rotor is aligned with the Rotor Holder at the
top of the Cup Cover. Attach the Cup Cover onto the Plastic Cup and install the
Plastic Cup onto the Motor unit. Check that the Plastic Cup and the Rotor is
securely fitted to the Motor unit, through the driving connector.
Auto Clean
7. Fill the Plastic Cup with warm water.
8. Press the ON/OFF Button for a few seconds to clean the Plastic Cup, Cup Cover
and Rotor very quickly and safely.