Instruction Manual

6. Check that the ON/OFF Button (at the top of the Motor unit) is OFF, plug the
power cable and switch it on. Press the ON/OFF Button to operate.
Place one hand on top of the Plastic Cover to stabilise the appliance. DO
NOT operate the appliance for more than 30 seconds without interruption.
Let the appliance rest for 2 minutes between processing cycles. After 3
processing cycles, allow an interval of 10 minutes to let the appliance cool
down before the next use, so as to prolong its service life. DO NOT allow
the appliance to idle while in operation.
7. On completion of chopping, release the ON/OFF Button, switch off the wall
switch and unplug the power cable. Wait for the blades to stop turning and
detach and Plastic Cup from the Motor unit. Remove the Plastic Cover from the
top of the Plastic Cup. The chopped food ingredients can be removed from the
Plastic Cup.
8. After rinsing the Plastic Cup with water, you may fill the cup with more washed
ingredients.
only if a Jam occurs: DO NOT continue chopping if the blade is jammed.
Release the ON/OFF Button. Switch off the wall socket and unplug the power
cable.
Wait for the blades to stop turning.
Detach the Plastic Cup from the Motor unit.
Clear the jam.
Once the Jam is cleared, perform steps 5 – 8 again.