Instruction Manual

Chop for NOT more than 30 seconds without interruption, resting for 2
minutes with a maximum of 3 cycles before resting for 10 minutes.
On completion of chopping, release the ON/OFF Button, switch off the wall
switch and unplug the power cable. Wait for the blades to stop turning and
detach the Plastic Cup from the Motor unit. The chopped food ingredients
can be removed from the Plastic Cup.
f. Make sure to remove any label or protective sheet which may prevent its
proper functioning.
DO NOT:
• cover the appliance during functioning;
• insert objects or body parts inside the protection cover of the appliance;
• overload the Plastic Cup by overfilling it. This is generally below ¾ of the total
volume of the Plastic Cup;
• use the appliance to process very hard ingredients such as meat with
attached bones, coffee beans, soybeans, rice, ice cubes or other frozen
foods, fruits with hard cores, hard seeds, thick skins or hard shells or foods or
liquids with a temperature greater than 60 C;
• allow hands, hair, clothing, curtains, spatulas and any other objects to come
into contact with the appliance’s motor and accessories to avoid personal
injury or damage to the machine when the appliance is in operation;
• use the appliance without any food items in the Plastic Cup;
• use the Rotor with any other container other than the Plastic Cup and Cup
Cover;
• place the appliance in the microwave oven or refrigerator to avoid damaging
it;
• touch the blades as they are VERY SHARP! Hold the Rotor of the Chopping
Blade while installing, removing or cleaning;
• operate the appliance for more than 30 seconds without interruption. Let
the appliance rest for 2 minutes for between processing cycles. After 3
processing cycles, allow an interval of 10 minutes to let the appliance
cool down before the next use so as to prolong its service life. DO NOT
allow the appliance to idle while in operation;
• press the ON/OFF Button too forcefully to avoid any damage;
• detach the Plastic Cup while the appliance is in operation or if the Power
Cable is still attached to the appliance;
Safety feature – the appliance will immediately stop working as the power is
disconnected. Even so, the Rotor will still be rotating at high speeds for some
time before stopping.
• leave the appliance unsupervised during operation.