User Manual

How to use s
1. Uncoil the power cable attached to the powerboard.
2. Ensure that the Powerboard Switch on the powerboard is switched OFF.
3. Insert the switch of the Extension Socket into the wall socket.
4. Lay the cable around the edges of a room. Avoid placing the cable on abrasive
surfaces or in positions where it can be damaged easily, away from high traffic
areas where it will NOT be tripped over.
5. Place the powerboard on a cool dry surface, away from heat sources and away
from combustible surfaces or those sensitive to heat.
6. Insert the plugs of appliances into the powerboard. When using multiple
appliances, add their wattages together to make sure the total DOES NOT exceed
the Extension Socket's wattage rating.
7. Switch the socket switch ON.
8. Thereafter, switch the Powerboard Switch ON. The LED neon power light on the
Powerboard Switch will light up and will go out when the switch is turned OFF.
9. When any appliance attached to the powerboard is to be switched off, switch off
the appliance first and detach the plug of the appliance from the powerboard.
Repeat this step for any other appliance.
10. When the plugs of all appliances attached to the powerboard have been removed,
switch the Powerboard Switch OFF, switch the socket switch OFF and remove the
plug of the Extension Socket from the wall socket.
How to clean s
1. Clean the Extension Socket only when its plug is removed from the wall socket.
2. Wipe the exterior of the Extension Socket using a soft, damp cloth or sponge.
Remove stubborn spots with a cloth moistened with mild liquid detergent. DO NOT
use abrasive scouring pads or powders. DO NOT attempt to clean the interior of
the device.
3. Never immerse the Extension Socket in water or other liquids.
4. Ensure that the Extension Socket is completely dry before use or storage.