Instruction Manual

6. What the Functions Buttons do:

Function What the Button does

Press the Control Button on the Control Panel or the ON/OFF Button

on the Remote Control once to turn the appliance ON

(button illuminates Blue light).

Press again to turn the appliance OFF

(button illuminates Red light).

ON/OFF

SPEED

MOSQUITO

COOL

SWING

ANION

7. When the COOL mode is activated, the Water Pump in the Water Tank pumps water

to saturate the Cooling at the back of the appliance. Air which flows through the

Cooling Pad loses heat to the water and exits at a slightly lower temperature.

Thus a decrease in temperature occurs; the exact decrease depends on the relative

humidity and air temperature. If the button is pressed when the Speed is high, the

fan speed will drop to its lowest speed for 30 seconds before resuming normal

operations.

Press the SPEED Button ( on the Control Panel or on the

Remote Control) to adjust wind speed from

Low >>> Medium >>> High

(button illuminates beside the current wind speed).

Press the MOSQUITO Button ( on the Control Panel or on the

Remote Control) once to enter the MOSQUITO Repellent mode (button

illuminates). The appliance emits ultrasonic waves to repel mosquitoes.

Press again to exit the MOSQUITO mode (button stops illuminating).

Press the COOL Button ( on the Control Panel or on the Remote

Control) once to enter the COOL mode (button illuminates).

Press again to exit the COOL mode (button stops illuminating).

Press the SWING Button ( on the Control Panel or on the

Remote Control) once to keep the vertical front grill swinging from side

to side continuously (button illuminates).

Press again to stop the vertical front grill from swinging from side to side

(button stops illuminating).

Press the ANION Button ( on the Control Panel or on the

Remote Control) once to turn the ANION mode of the air purifier ON

(button illuminates).

Press again to turn the ANION mode of the air purifier OFF

(button stops illuminating).