Instruction Manual

HOW TO USE
Warning: The fan is fully assembled. DO NOT operate the fan with any of its parts
disassembled. The entire assembled unit works as a single appliance. The fan must
only operate in the upright position. Any other position will be hazardous.
1.
2.
3.
4.
5.
Avoid using the appliance in a closed environment. The appliance should be used
in an open and well-ventilated environment.
When the appliance operates under the COOL function, the Water Tank must be
filled with water. Although the appliance can be used as an ordinary fan without
using the COOL function, accidentally operating the appliance under the COOL
function with an empty Water Tank may result in possible damage to the appliance.
Thus, to be on the safe side, the Water Tank of the appliance should be filled with
water prior to operation.
When moving the appliance, be aware that water can spill out of the Water Tank.
Thus when moving an appreciable distance, it is recommended that all water be
drained from the Water Tank prior to the move.
Draining the Water Tank
The Water Tank should be drained and re-filled with fresh,
clean water frequently. DO NOT fill the Water Tank with
other liquids.
Pull out the Water Tank found at the bottom and back of
the appliance.
Pull out the Drain Valve and wait until all water has flowed
out of the Water Tank.
Put the Drain Valve back in.
Filling the Water Tank
Water can be added to the Water tank by:
Pulling out the Water Tank (bottom and back of the
appliance), and using a hose or the Water Container
provided (or any clean container) to fill up the Water
Tank with water until the orange water level indicator
reaches the top of the Water Level scale (above the
minimum and below the maximum levels of the tank).
Push the Water Tank back into the appliance and close
the hatch.
5