User Manual

The appliance
functions, but the
air coming out is
not cool enough.
The Cooling Pad is dry or
contain an insufficient amount
of water due to either
insufficient amount of water in
the Water Tank or that the
Water Pump is not functioning.
Clean the Water Tank and
replace the water in the Water
Tank. Clean the Water Hose.
Remove dirt from the Water
Pump’s strainer. Check that the
Water Pump is functioning
normally. If the Water Pump is
not, please stop use and
contact customer service.
The Dust Filter or Cooling Pad is
clogged with dust or dirt.
Clean or replace the Dust
Filters or Cooling Pads.
Excessive high relative
humidity in the room due to
environmental factors (of which
nothing can be done) or that
the appliance has been turned
on in its current cycle that the
room has been saturated with
moisture (saturated vapour
pressure of water vapour is at
maximum) so much so that the
appliance is unable to lower
the temperature of the room.
Turn the COOL mode off to
avoid releasing more moisture
into the room.
Water is spurting
out from the air
inlet together with
air.
Cooling Pad has strayed out of
position or that the Water Tank
is clogged with debris.
Place the Cooling Pad in the
correct position.
Clean the Water Tank and
replace the water in the Water
Tank. Just in case that debris
has entered the system, clean
the Water Hose and the Water
Pump’s strainer.
10