User Manual

PROBLEM SOLVING
Fault symptom Cause analysis Troubleshooting
The appliance
does not respond
when any of the
buttons are
pressed.
The power cable could be
damaged.
Please stop use and contact
customer service.
No air flows out of
the appliance
while the
appliance is
operating.
The motor could be damaged. Please stop use and contact
customer service.
The wiring within the motor or
appliance could have loosened.
Please stop use and contact
customer service.
AC fuse could be damaged or
the circuit stops functioning to
prevent overload.
Replace the fuse or restart the
unit. If problems persist, please
stop use and contact customer
service.
Control Panel could be
damaged.
Contact customer service to
repair or replace the Control
Panel.
Thermal protection inside the
motor has been activated as
appliance was used for longer
than 6 hours.
Please switch the appliance off,
unplug from the electric mains
and wait for the appliance to
cool down completely before
attempting to operate the
appliance again. If the
appliance still does not operate
normally, please stop use and
contact customer service.
9