USER MANUAL Rechargeable Batteries Charger POWEROWL since 1996 A Professional Battery Manufacturer service@powerowl.
Dear Customer Hello, thank you very much for choosing POWEROWL products, In order to use and maintain the battery correctly, please read this manual in detail. If you receive a product that is abnormal, please contact us immediately instead of leaving a bad review. Negative reviews cannot solve the problem, but we can solve the problem for you. Thank you for your understanding.
Features: (1) Suitable for 1-8 pcs AA AAA NiMH/NiCD rechargeable batteries. (2) Micro USB input, USB cable is included. (3) Over-heat, over-current, over-voltage, short-circuited protection and defective battery detection. (4) Steps charging control make sure batteries are fully charged: pre-charging,fast-charging, float-charging, trickle-charging. (5) Charging protection for abnormal batteries. Prevent batteries from short-circuit, over-charging and over-heat.
Operating Instructions: (1) Insert 1 or 8 pcs AA AAA NiMH/NiCD rechargeable batteries into the charger. Pay attention to the polarity marks“+”and“-”. (2) Connected the USB cable with the micro socket. (3) Remove batteries and unplug the charger after charging.
Cautions: (1) Batteries which are broken by the skin are not allowed to be charged. (2) It is limited to charge for DC 1.2V Ni-MH or Ni-CD rechargeable batteries, do not use it to charge other types batteries like alkaline batteries. (3) Please ensure the battery installed is correct: make the +/- pole of the battery is match for the +/- pole of the charger, or a slight electric shock may occur. (4) This charger is for indoor charging and do not expose it to rain or snow.
(11) Please remove the battery after charging: the battery slot cannot be used as a storage battery when the charger is not in use.
Warranty Card
Thank you for choosing THANK YOU FOR CHOOSING POWEROWL service team is online 24 hours service@powerowl.
