User Manual

PowerOptimal Elon® 100 User Manual
Version date: 2022/06/28
Page 6 of 24
Version number: 2.15
© PowerOptimal (Pty) Ltd 2022. The content of this document is confidential and all rights to the intellectual
property and/or information contained herein remain vested in PowerOptimal, except if otherwise agreed in
writing.
Instruction video: www.poweroptimal.com/elon100
Refer to our easy to understand instruction video on how to use the Elon 100.
2. Operation
2.1 Elon® 100 controller
Your Elon® 100 has a controller that is typically
installed next to your DB (distribution board). The
controller has two main functions:
1. INDICATING ACTIVITY AND STATUS:
Indicating heating activity and status
through the mains (red) & solar
(green) indicator lights (Section 2.2)
2. CONTROL TIMING:
Setting the timing on the control dial
(Section 2.3)
2.3
Control
dial
2.2 Mains
& solar
indicator
lights