Operator Manual

MAINTENANCE

Regular maintenance will extend the life of this generator and improve its performance. The warranty does

not cover items that result from operator negligence, misuse, or abuse. To receive full value from the warranty,

operator must maintain the generator as instructed in this manual, including proper storage.

WARNING!

Before inspecting or servicing this machine, make sure the engine is off and no parts are

moving. Disconnect the spark plug wire and move it away from the spark plug.

If you are unsure of how to perform a maintenance task, have the unit serviced by a

PowerMax dealer

Only use speciﬁed Pulsar replacement parts.

Maintenance Schedule

Pre-Operation Steps

Before starting the engine, perform the following pre-operation steps:

• Check the level of the engine oil and the fuel tank level. Check for any leakage.

• Check fuel hose for cracks or damage. Replace if necessary.

• Make sure the air ﬁlter is clean.

• Remove any debris that has collected on the generator and around the mufﬂer and controls.

Use a vacuum cleaner to pick up loose debris. If dirt is caked on, use a soft bristle brush.

• Inspect the work area for hazards.

After Each Use

Follow the following procedure after each use:

• Shut off engine.

• Store unit in a clean and dry area.