Product Manual


10
7.0 Setup and assembly
Read and understand all
assembly and setup instructions before attempting
assembly. Failure to comply may cause serious
injury.
7.1 Shipping contents for PM-2X2R
Bold text is how each part is identified in assembly
instructions.
BOX #1 – Stand assembly, contains:
See Figures 7-1 and 7-2.
4 Cross braces – S1
2 Lower supports – S2
1 Front panel – S3
1 Rear panel – S4
1 Left side panel – S5
1 Right side panel – S6
1 Open side panel – S7
4 Swivel casters – S8
4 Leveling foot – S9
4 Hex nuts – S10
1 Stand hardware package, p/n PM2X2S-HP
consists of 3 smaller bags (Figure 20):
16 Hex cap screws M8x25 – HP001
16 Lock washers M8 – HP002
16 Flat washers M8 – HP003
16 Hex cap screws M6x12 – HP004
16 Lock washers M6 – HP005
16 Flat washers M6 – HP006
1 Hook – HP007
2 Machine screws M4x6 – HP008
Figure 7-2: stand hardware package
Figure 7-1: PM-2x2R stand contents (not to scale)