Use and Care Manual

9
The diffusion filter will not need replacing. It
should be inspected occasionally, and if needed,
cleaned by light vacuuming or compressed air.
(An optional charcoal diffusion filter – stock no.
1791084 – may be purchased, and is used to
reduce odors and non-flammable vapors.)
Transmitter Replacement
The remote transmitter provided with your Air
Filtration Unit is pre-programmed and ready to
operate once the battery is installed.
However, should you ever need to replace the
remote transmitter, the new transmitter will need
to be programmed for your Air Filtration Unit.
This is easily done, as follows (Figures 4 and 5):
1. Start the Air Filtration Unit.
2. On the Air Filtration Unit’s control panel,
press and hold the Speed and Timer buttons
simultaneously for 4 seconds, until you hear
a “beep”.
3. Turn on the remote transmitter.
4. You should now be able to operate the
machine using the remote transmitter.
Figure 3
Figure 4
Hole Dimensions
Figure 5