Use and Care Manual

Operation (CONTINUED)

• Save all instructions

Change Airflow Direction

NOTE: The Wheeled String Trimmer Mower is designed

with the ability to offset the Blower from a centered position

to a right side position.

1. Depress the finger control on the right upper handle.

By depressing the finger control, the head becomes

unlocked and can be swiveled to two positions to the

right. Upon release of the finger control, a pin

will lock the Blower into the desired position. Swiveling

the Blower repositions the outlet and redirects the

airflow forward. (Fig. 5)

2. The airflow can be directed up or down by loosening

the discharge nozzle wing knob and rotating the nozzle

in the desired direction. Tighten wing knob. (Fig. 6)

Troubleshooting

• Save all instructions

PROBLEM POSSIBLE CAUSE(S) SOLUTION(S)

Blower fan will not rotate.

Blower not fully installed into clutch

housing.

Install Blower so metal saddle on tube is

fully inserted into corresponding opening

of clutch housing.

Technical Service

• Save all instructions

You may have further questions about assembling, operating, or maintaining this Blower. If so, you can contact our

Technical Service Department at 1-800-737-2112 (English only). You may also write to:

(Correspondence only)

MAT Engine Technologies, LLC

ATTN: Technical Service – METL

6700 Wildlife Way

Long Grove, IL 60047

When contacting the Technical Service Department, have ready:

• Your Name

• Your Address

• Your Phone Number

• Model Number of Product

• Date of Purchase (include copy of receipt for written requests)

If you need assistance or have any questions,

CALL TOLL FREE: 1-800–737-2112

Fig. 5 Fig. 6

FINGER

CONTROL

WING KNOB