Owner's Manual And Operations Guide

WARNING! A rotating cutting wheel is very dangerous. Stand at controls and
ensure that the cutting wheel comes to a complete stop before doing anything else.
1. Move the engine throttle to the slow position.
2. Push the emergency (on/off) switch to stop the engine.
3. Set park brake before leaving controls.
Emergency Shutdown Procedure
1. Immediately press the emergency (on/off) switch to stop the engine.
2. Be sure to allow all moving parts to come to a complete stop.
3. Pull the brake lever to engage the brake.
4. Rectify the emergency situation and return to normal operation.
Maintenance
❏ Make sure all nuts, bolts, and screws are tightened.
❏ Never store the equipment with petrol in the tank inside a building where
fumes can reach an open flame or spark. Allow the engine to cool before
moving the grinder.
❏ To reduce fire hazards, keep the engine and petrol storage area free of grass,
dirt, and excessive grease.
❏ Replace worn or damaged parts for safety. If the fuel tank has to be drained,
this should be outdoors.
❏ Regularly check the oil level and add some oil or replace it if necessary.
❏ Frequently check the grinder and ensure that all bark and dirt deposits are
removed from beneath the deck.
❏ Lubricate the wheel axle and the bearings with grease regularly.
❏ Check the cutting wheel often. In order to achieve clean work, the blade
should always be sharp and well balanced.
Stump Grinder 12
QVTOOLS, LLC | 2731 CRIMSON CANTON DRIVE, LAS VEGAS, NV 89128 | 1-800-344-3371