Product Manual

Page 17 of 27
4. Place hose bands (G) over the hose.
5. Place the boom arm (F) pivot shaft into housing tube.
6. Install the hose nozzle (D) or handle assembly, onto other end of the hose. Adjust the handle to the
desired position and tighten the clamp.
Before Each Use
⚠WARNING
 Inspect the unit for any signs of damage or foreign material in the machine. Remove any solid
material that may be preventing the unit from operating properly.
 Be familiar with the controls, how each functions, and what each operates.
 Check engine oil level. Add oil if necessary, following the engine manufacturer’s