Product Manual
47
Assembly Instructions
Cradles to Beam
M8-1.25 x 30mm Bolt
Qty: 4
Cradles to Beam
M8-1.25 Nut
Qty: 4
Step 11 – Log Cradle Assembly
• Remove vertical pin and lynch pin. Pivot beam to the horizontal
position and re-install both pins into tow bar.
• Install (2) bolts and (2) nut into the bottom holes of the beam.
• Using the slots in the bottom of each log cradle arm, rest the log cradle
arms on the installed bolts and nuts.
• Install the remaining (2) bolts and (2) nuts into the top holes of the
beam and log cradle arms.
• Torque to 21 ft.-lb.
Tools Needed
• 13mm Wrench
• Torque Wrench
Fasteners Needed from Parts Bag:
Nuts
Beam
Log Cradle
Bolts