Product Manual B

Page 23 of 35
Removing Oil
The oil must be drained from the Oil Drain Plug (figure 2).
1. Remove the dipstick (C)
2. Please an approved container below the oil drain plug.
3. Remove the Oil drain plug (D) and allow oil to the drain into the approved container.
4. Install Oil drain plug (D) and wrench tighten.
How to Service the Fuse-(figure 3, if applicable)
⚠WARNING
Never use a fuse with a rating greater than the one originally equipped with the engine. Serious
damage to the electrical system or a fire could result.
1. Remove the 6x12mm screw from the rear cover of the engine switch box.
2. Remove the fuse cover, then pull out and inspect the fuse.
3. Reinstall the rear cover. Install the 6x12mm screw and tighten.
figure 3 figure 4