Product Manual B

Page 19 of 35
You may use unleaded gasoline containing no more than 10% ethanol (E10) or 5% methanol by
volume. In addition, methanol must contain co solvents and corrosion inhibitors. Use of fuels with
content of ethanol or methanol greater than shown above may cause starting and/or performance
problems. It may also damage metal, rubber, and plastic parts of the fuel system. Engine damage or
performance problems that result from using a fuel with percentages of ethanol or methanol greater
than shown above are not covered under warranty.
How to Add Fuel
⚠WARNING
Gasoline and its vapors are extremely flammable and explosive. Fire or explosion can cause severe
burns or death.
For refueling, refer to the manufacturer’s instructions provided with the equipment. See the following
for a Powerhorse supplied standard fuel tank refueling instruction
1. With the engine stopped and on a level surface, remove the fuel filler cap and check the fuel level.
Refill the tank if the fuel level is low.
2. Add fuel to the bottom of the maximum fuel level limit of the fuel tank. Do not overfill. Wipe up
spilled fuel before starting the engine.