Product Manual

Page 19 of 22
Failure
Possible Cause
Corrective Action
discharged.
2. Engine not running at full
speed.
2. Set throttle control to FAST if
equipped.
Chipping action slow
or engine stalling.
1. Branch diameter is too thick.
1. Do not process branches over 3"
diameter.
2. Throttle set is too slow.
2. Adjust throttle to increase engine
speed.
3. Tree limbs are extremely hard
or dried out.
3. Material is not suitable for chipping.
Machine does not
seem to have full
chipping power.
1. The belts maybe too loose
and slipping.
1. Adjust or replace belts as needed.
Parts Diagram