Product Manual

Page 12 of 22
Assembly Instructions
⚠WARNING
This wood chipper presents serious injury hazards to untrained users. Read through this entire
manual to become familiar with the controls and operations before starting the machine.
The major components of this wood chipper have been assembled at the factory. Some minor
assembly is required. The assembly process will use all the parts and hardware listed in the inventory.
DO NOT attempt to start this machine until all assembly has been completed. Serious personal injury
and damage to the machine could occur.
Install In-feed Bin
Position the in-feed bin (A) to the engine base and attach the bin on the hinge side first. Close the bin
and use the M8 bolt, spring washer, and flat washer to attach.
Install the Discharge Chute
Install the discharge chute (B) with the engine base by using M8 bolt to tighten.
Before Each Use
⚠WARNING
 Inspect the unit for any signs of damage or foreign material in the machine. Remove any solid
material that may be preventing the unit from operating properly.
 Be familiar with the controls, how each functions, and what each operates.
 Check engine oil level. Add oil if necessary, following the engine manufacturer’s