Product Manual

Installation / Initial Set-Up

There are a number of important steps required to set up your generator for initial use. These

steps are:

Each of these steps is discussed in detail below:

1. Unpacking & Delivery Inspection

You should inspect the generator immediately after you receive delivery.

See the “Machine Component Identification” section of this manual for a

diagram of the generator and its components.

• If you are missing or have damaged components, contact Product Support at 1-866-443-2576.

Funnel

Spark Plug Wrench

Part # 801009

and Handle Bar

Part # 801854

Parallel Cable Kit

Flat Head

Generator

(Sold separately)

Screw Driver

Part #89778

Part # 801855

2. Planning the Power Load

Plan your power load so that you do not exceed the generator’s rated capacity.

See the “Power Load Planning & Management” section of this manual to review how to plan and

manage power loads for the generator.

Steps for Installation / Initial Set-Up

Unpacking & delivery inspection.

Planning the power load to stay within the generator’s rated

capacity.

Setting up generator for the type of power generation you need:

portable power source, or

connected to a building as a back-up power source.

Selecting a site for using the generator.

Grounding.