Product Manual

Table Of Contents

Installation / Initial Set-Up (cont’d)

6. Wheel Kit Assembly

Your generator is equipped with a free wheel kit to provide easy portability.

Secure the generator on blocks at least 7” off the ground or work table. Make sure the holes in the base of the

generator are not obstructed to allow for installation of axle and vibration brackets.

Installing the axle

and wheels

1. Slide (1) Axle into the end of the Wheel (1).

2. Slide (1) Axle Washer onto the axle.

3. Slide the Axle, Wheel, and Washer assembly into the Frame.

4. Insert (1) Hairpin in the holes on that end of the Axle to secure the Wheel.

5. Repeat for the opposite Wheel.

Installing the legs

1. Attach (1) Rubber Foot to (1) Leg Bracket. Secure using (1) M6 x 20mm Flange Bolt

and (1) M6 Flange Nut.

2. Repeat Step 1 to assemble the second Leg Bracket assembly.

3. Align (1) Leg Bracket assembly to the holes in the generator base. Attach using (4)

M8 X 12 Bolts and (4) M6 Flange Nuts.

4. Repeat Step 3 to attach the remaining Leg Bracket assembly to the generator base.

Axle

Washer

Wheel

Hairpin

Leg Bracket

Rubber Foot

M6 x 25mm Flange Bolt

M6 Flange Nut

Generator Base

M6 x 12mm Flange Bolt