Product Manual
Machine Component Identification
9
Reference
Description
Reference
Description
1
Handle
9
Muffler
2
Air Cleaner
10
Generator Head
3
Recoil Starter Grip
11
Control Panel
4
Fuel Valve
12
Battery Location (Battery Not Included)
5
Gas Tank
13
Oil Fill
6
Fuel Gauge
14
Oil Drain Plug
7
Gas Cap
15
ON / OFF / START Switch
8
Vibration Isolation Mount
16
Roll Cage Frame
REFERENCE GUIDE
Reference 1 - Handle
Provides a means for moving the generator. To move generator, pivot handle up
and secure using the handle pin.
Reference 2 – Air Cleaner
Filter element that removes particles from incoming air. See the engine section of
this manual for maintenance and replacement.
Reference 3 – Recoil Starter Grip
Grasp firmly when manually starting engine to engage the engine cranking.
Reference 4 – Fuel Valve
ON / OFF valve to control the fuel flow into the engine. Located on the left side of
the recoil. ALWAYS keep valve closed when the generator is not in use.
Reference 5 – Gas Tank
A large tank that allows for extended run capabilities. ALWAYS allow room for
gasoline expansion by not filling the gas tank completely.
Reference 6 – Fuel Gauge
Fuel level indicator for gas tank.
Reference 7 – Gas Cap
The gas cap is extra-large, creating a large hole for refilling and has a comfortable
grip.
Reference 8 – Vibration Isolation Mount
The engine and generator head are mounted on rubber mounts that absorb most of
the engine vibration. This feature eliminates the tendency of the machine to “walk”
while engine is running.
Reference 9 - Muffler
An acoustic device installed onto the exhaust system that is designed to reduce
noise. The outlet also includes a spark arrester.
Reference 10 - Generator Head
The electricity producing part of the generator.
Reference 11 – Control Panel
An electrical device that contains receptacles, switches and other electrical devices.
Reference 12 – Battery Location
Storage location for the battery (battery not included).
Reference 13 – Oil Fill
Cap with dipstick for checking oil level. Also provides access port to fill oil.
Reference 14 –Oil Drain Plug
Bolt located on the engine crankcase that allows oil to be drained.
Reference 15 – Engine Switch
ON / OFF / START switch for power to engine for starting.
Reference 16 – Roll Cage Frame
Provides protection for the generator
3
2
1
9
13
11
4
5
15
10
7
6
14
8
16
12










