Product Manual

Installation / Initial Set-Up

There are a number of important steps required to set up your generator for initial use. These

steps are:

Steps for Installation / Initial Set-Up

1. Unpacking & delivery inspection.

2. Planning the power load to stay within the generator’s rated

capacity.

3. Setting up generator for the type of power generation you need:

a. portable power source, or

b. connected to a building as a back-up power source.

4. Selecting a site for using the generator.

5. Grounding.

Each of these steps is discussed in detail below:

1. Unpacking & Delivery Inspection

You should inspect the generator immediately after you receive delivery.

See the “Machine Component Identification” section of this manual for a

diagram of the generator and its components.

• If you are missing or have damaged components, contact Product Support at 1-866-443-2576.

2. Planning the Power Load

Plan your power load so that you do not exceed the generator’s rated capacity.

See the “Power Load Planning & Management” section of this manual to review how to plan and

manage power loads for the generator.

Generator

Funnel

Part # 791453

Flat Head

Screw Driver

Part # 791455

Spark Plug Wrench

and Handle Bar

Part # 791454

12V DC Cord

Part # 794974