Product Manual

60
Assembly Instructions
Step 21B – High Pressure Supply Hose
• Route the High-Pressure Supply Hose from the high pressure fitting on the
pump up to the Large Swivel Fitting on the control valve inlet.
• Screw finger-tight High-Pressure Supply Hose to the high pressure fitting on
the pump outlet.
• Wrench tighten 1.5-3.0 turns past “finger tight”
• Screw finger-tight remaining end of the High-Pressure Supply Hose to the
Large Swivel Fitting on the control valve inlet.
• Wrench tighten 1.5-3.0 turns past “finger tight”
Tools Needed
• 1” Wrench
• 7/8” Wrench
OR
• Crescent Wrench
(2 Needed)
Large
Swivel
Fitting
High Pressure
Supply Hose
High Pressure
Supply Hose
High Pressure
Fitting
7/8” Wrench
1” Wrench