Product Manual

59
Assembly Instructions
Step 21A – Low Pressure Return Hose
• Route the low pressure return hose from the valve outlet fitting down to the
return line filter fitting
• Secure the low pressure return hose to return line fitting with supplied hose
clamp installed on hose. Torque to 77 in.-lb.
• Secure the remaining end of the low pressure return hose to valve outlet
fitting located on the control valve with supplied hose clamp installed on hose.
Torque to 77 in.-lb.
Tools Needed
• 8mm Socket Wrench
Hose
Barb
Fitting
Low Pressure
Return Hose
Return Line
Fitting
Low Pressure
Return Hose