Product Manual

Assembly Instructions

Step 19 - Fittings

• Lubricate O-ring and threads on fitting with clean oil

• Looking at fitting from end with nut/washer/O-ring assembly, turn nut

clockwise as far as possible

• Using wrench, turn (1) Hose Barb Fitting into the valve port marked “Out” until

washer touches control valve. Continue turning until washer touches thread

nearest wrench pad

• Back off fitting counterclockwise not exceeding one revolution until it is

orientated in the correct position

• Place wrench on the wrench pad of fitting to prevent fitting from turning and

torque nut to 70-87 ft.-lb.

Tools Needed

• 1 1/16” Wrench

• 1 1/4” Wrench

• Crescent Wrench

(2 Needed)

Fasteners Needed from Parts Bag:

Hose

Barb

Fitting

Valve Port

Hose Barb Fitting

Qty: 1

Nut

O-ring

Washer