Product Manual

Assembly Instructions

Step 17 - Fittings

• Lubricate O-ring and threads on fitting with clean oil

• Looking at fitting from end with nut/washer/O-ring assembly, turn nut

clockwise as far as possible

• Using wrench, turn (1) Small Swivel Fitting into valve port marked “B” until

washer touches control valve. Continue turning until washer touches thread

nearest wrench pad

• Back off fitting counterclockwise not exceeding one revolution until it is

oriented in the correct position

• Place wrench on the wrench pad of fitting to prevent fitting from turning and

torque nut to 37-46 ft.-lb.

• Thread Small Swivel Fitting nut onto Cylinder Hose until hand tight.

• Wrench tighten 2-3 Turns past Finger Tight

Tools Needed

• 7/8” Wrench

• 3/4” Wrench

• 1” Wrench

• Crescent Wrench

(2 needed)

Small

Swivel

Fitting

Cylinder

Hose

Valve Port

Fastener Needed from Parts Bag:

Small Swivel Fitting

Qty: 1

Nut

O-ring

Washer