Product Manual

42
Assembly Instructions
Step 4 – Beam Assembly
• Align holes in the log stripper with the holes in the trunnion mount
• Attach the log stripper to beam using (6) nuts and (6) bolts.
• Torque to 21 ft.-lb.
• Remove the low pressure return hose and high pressure supply hose.
• Remove lag bolts (2) located inside trunnion mounts and stand assembled
beam onto the end plate in the vertical position. Carefully move beam off to
side, clear of work area.
Tools Needed
• 13mm Wrench
Log Stripper
Nut
Bolt
Cylinder
Low Pressure
Return Hose
High Pressure
Supply Hose
Trunnion Mount
Log Stripper to Beam Bolt
Qty: 6
Log Stripper to Beam Nut
Qty: 6