Product Manual

22
SPLIT CONTROL LEVER OPERATION
Splitting Operation
WARNING: NEVER attempt to remove a stuck log by:
• Modifying the splitter.
• Adding attachments to the splitter.
Personal injury could result from log or metal pieces flying out at high speed toward the operator or
bystanders, or the splitter could become damaged.
9. Return wedge
Move Split Control Lever away from end plate to return wedge.
Once the control valve is actuated in the return direction, the wedge is designed to keep returning by itself
completely and then stop automatically.
WARNING:
Stay clear while the wedge is returning. It is still powerful enough on the return stroke to cause serious
injury.
10. Remove split
wood
Remove split wood from area.
Move each log away from log splitter after it is split. Split logs left near the log splitter are a trip hazard.
11. After use
1. Turn off engine.
2. Remove engine debris.
Debris on a hot engine can be a fire hazard. After the engine is off, clean debris and chaff from engine
cylinder head, cylinder head fins, blower housing rotating screen, and muffler areas.
WARNING: Avoid contact with hot muffler.
3. Return to horizontal position.
If in the vertical position, return log splitter to the horizontal position for greater stability and to prepare for
transportation. Avoid contact with hot muffler.