Product Manual

12
Moving and Towing to the Job Site
5. Put support leg
UP
Move the support leg to the “UP” position and lock.
6. Tow to desired
location
Tow log splitter carefully to desired work site.
(See Before Each Use section on selecting an appropriate work site)
Important safety instructions:
• Added length. Be aware of the added length of the splitter.
• Speed limit. Never tow this log splitter over 45 mph. Faster speeds may result in
loss of control.
• Rough terrain. Drive slowly and take extra caution when traveling over rough
terrain.
• On public roads. If towing on a public road, make sure to comply with all local,
state, and federal towing requirements. It is the sole responsibility of the purchaser
to obtain licensing, trailer lights, safety chains or signage as needed to comply.
• Unattended. Turn off the towing vehicle before leaving the splitter unattended.
• Under the influence. Never tow or operate this splitter while under the influence of
alcohol, drugs, or medication.
7. Lock support leg
down & unhitch
Lock support leg in the DOWN position and disconnect from vehicle.
NEVER operate log splitter while it is attached to the vehicle.
Attach coupler to class 2 or higher
hitch with 2” ball. Latch securely.
Hook both safety chains
to the towing vehicle
Support leg