Product Manual A

Page 17 of 31
Operating Instructions
⚠WARNING
Damage to your eyes, hands, and ears could result from using this machine without proper
protective gear. Always wear safety glasses, hearing protection, and leather gloves when operating
this machine.
Loose hair and clothing could get caught in machinery and cause serious personal injury. Keep
loose clothing and long hair away from moving machinery.
If you have never used this type of machine or equipment before, WE STRONGLY RECOMMEND
that you read books, trade magazines, or get formal training before beginning any projects.
This Chipper Shredder does not have oil in the motor when shipped. Add oil before operating the
Chipper Shredder, or the motor will seize.
Chipping/Shredding
Understand and follow all of the safety precautions listed in warning and caution areas before
operation.
This Chipper Shredder is intended for mulching garden and pruning waste such as green branches,
twigs, brush, vines, and long grasses. DO NOT use this Chipper Shredder for chipping construction
debris, plastic, paper products, rope or twine, or any material that may contain metal.
Note: Remove any nails, rope, twine, or rocks that may be imbedded in roots, before inserting
material into the Chipper Shredder.
To Operate the Chipper Shredder
⚠WARNING
Carbon Monoxide Warning. The running engine gives off carbon monoxide, a
poisonous gas that can kill you. You CANNOT smell it, see it, or taste it. If you start to feel
sick, dizzy, or weak while using the chipper, shut off the engine and get to fresh air RIGHT
AWAY. See a doctor. You may have carbon monoxide poisoning.
1. Place the Chipper Shredder on a flat, firm, dirt or grass surface and point the outlet in a safe
direction.
2. Check the oil and gas levels before starting the motor.
3. Place the bag over the chute and tie it securely in place.
4. Make sure the hopper and funnel are empty before starting the engine. If there is material in the
hopper or funnel, the pull start cord may stop suddenly causing the Chipper Shredder to fall over,
or causing injury to your hand or arm.
5. Put on eye and ear protection and gloves, start the Chipper Shredder as instructed in the
manual, then set the throttle to FAST.
6. Stand to the side of the hopper and make sure you have a stable stance and firm footing.
To Start the Chipper Shredder
1. Turn the fuel lever to the ON position (Pic.8, 8.1).
2. Set the choke lever to the ON position (Pic.9, 9.1).