Product Manual

Page 4 of 31
Intended Use
The Powerhorse 3-in-1 Wood Chipper is a gas engine-powered chipper shredder that breaks up
leaves and wooded pieces such as tree branches, brush, and limbs into smaller volume via a high-
speed rotor containing chipping blades and shredding hammers. It should not be used for any other
purpose.
Technical Specifications
Property Specification
Maximum Chipping Capacity 3”
Shredder Capacity 1/2”
Chipping Knives 2
Shredder Hammer 4 Y-HAMMERS
Reduction Rate 15:1
Chipper Knife Material CR12MoV
Hopper Dimensions (In.) 16.7X15.2
Limb Chute YES
Wheel Size (In.) 10x3
Wheel Material PU
Wheel Type SOLID
Net Weight (Lb.) 121
Gross Weight (Lb.) 130
Assembled Dimension (In.) 30x24.1x41
Packing Dimension (In.) 31.9x23.8x22.2
Engine Specifications
Engine Brand Rato
Engine Type OHV
Power 6.5HP
Displacement 212cc
Starting Recoil
RPM 3600
Fuel Capacity 0.7Gal
Oil SAE 30W
EPA3 Approval YES
CARB Approval YES
⚠CAUTION
HIGH ALTITUDE OPERATION
Operating at an altitude of greater than 6000 feet (1828 meters) may affect your engines performance,
fuel consumption, and emissions. To remain emissions compliant and improve engine performance at
higher altitudes, a high-altitude kit is required. A high-altitude kit includes a carburetor jet resized to
help correct air / fuel mixture at altitude. To order a high-altitude kit or if you have additional questions,
go to www.northerntool.com or contact us at 1-866-443-2576. Please note, engines with the high-
altitude kit installed operated at lower altitudes could cause severe engine damage and affect
emissions compliance. When modified, a tag or decal should be added to the product stating that a
high-altitude kit was installed and to remind you to re-service the carburetor (re-jet) when operating in
lower altitude environments.