Quick Start Guide

5

Installation
2.1 Installing PowerHome2
PowerHome2 can be downloaded from http://www.power-home.com and is fully
functional with a 30 day evaluation period. After the evaluation period has
expired, PowerHome2 will not send commands to hardware controllers and will
have to be registered. You may purchase an unlock key from the above website.
If you are installing PowerHome2 for the first time, just run the setup.exe file and
follow the instructions on the screen. If you are upgrading from a previous
version, please follow the upgrade instructions on the website.
2.2 Starting PowerHome2 the First Time
When starting PowerHome2 for the first time, you will be asked to enter a
registration name. This name must be between 5 and 50 characters and will be
used to generate your registration number. This registration number can be
found under the menu Help->About. After the registration name has been
entered, PowerHome2 will be running. This is the screen you should see. Note
the Wizards’ toolbar button.