Quick Start Guide

link mode, you visit the next device to continue the Auto

Discovery process.

5. Click on the appropriate radio button.

6. Click Next.

The remaining Device Wizard screens for Insteon Devices are unique to

each type of discovery method and are not reproduced in this Quick Start

Guide. Just follow the instruction on each screen and enter any

information requested for your device.

7. After you have gone through each screen Click Next and then Click

Exit.

Note: If you used the Auto Discover method or the Scan PLC/PLM

method, PowerHome2 gave your devices sequential names and

numbers. It is important to change those device IDs to names that

have meaning to you (e.g. from Spider Link1 to Kitchen Overhead). It

is equally important to enter a description of your choosing for each

device and to enter each device’s location (e.g. Kitchen, Master

Bedroom) because the descriptions and locations you enter will be

used by the Control Center Wizard to create graphic screens.