Quick Start Guide

10
Some of the X-10 controllers double as Insteon Controllers. Select the
appropriate X-10 controller and verify that it is connected to your PC and
as well as the powerline (for the controllers that require it).
The remaining Controller Wizard screens are unique to each type of
controller and are not reproduced in this Quick Start Guide. Just follow
the instructions on each screen and enter the information requested for
your controller.
6. The last step is to click on the Next button. The Wizard automatically
uses the information entered to set up your controller. After creating
the controller entry, PowerHome2 automatically reinitializes so that
PowerHome2 and your controller can work together.
7. If you would like to check the information entered for your controller or
modify the information, you can do so by navigating to PowerHome
Explorer>Setup>Controllers.