Operation Manual

GB │ 11 ■
PUTK 50 A1
3 4
Dismantling/storage
WARNING! RISK OF INJURY!
► Remove any load before converting the product.
► Risk of crushing! A lot of force is required for folding the product. Make
sure that you do not injure yourself. Do not fold the appliance in a jerky
fashion.
♦ Fold the product in reverse order as described in the section Use.
♦ Store the product lying down so that it cannot tip over. Place the product in
a clean, dry place away from direct sunlight.
Maintenance
♦ Check that all the screw connections are sufficiently tightened at regular
intervals.
♦ If necessary, tighten all screw connections manually.
♦ All damaged screw joints should be replaced by a specialist.