Owner's Manual

APPLIANCE
CAUTIONS
DO
NOT plug in battery chargers for cordless power
tools if the charger carries a warning that dangerous
voltages are present at the battery terminals.
Certain chargers for small nickel-cadmium
or
nickel-
metal-hydride batteries can be damaged
if
powered by
this inverter. Two types
of
appliances are susceptible to
damage: Small, battery-operated appliances such as
flashlights, cordless razors and toothbrushes that plug
directly into an AC receptacle.
Some fans with synchronous motors may slightly
increase in speed
(RPM)
when powered
by
the inverter.
This is
not
harmful
to
the fan
or
to
the inverter.
Use safety approved extension cords rated at 15 Amps
or
higher.
GFCI devices may
not
work with modified sine wave
(MSW)
power.
This inverter is
not
tested for use with medical
equipment.
This inverter is
not
tested for use in marine applications.
In the event
of
a continuous audible alarm
or
automatic
shut down, turn the inverter OFF immediately. Do
not
restart the inverter until the source
of
the problem has
been identified and corrected.
When using your PowerDrive inverter
to
power lead acid
battery chargers (Like those used
for
a car,boat
or
motorcycle) with modified sine wave, check the
temperature
of
the battery charger after 1 O minutes. If the
battery charger becomes hot, immediately disconnect it
from the inverter and allow it
to
cool before resuming the
charging operation.
Do
not
use power strips woth surge protection.
WARNING:
DANGER
OF
BATTERY
EXPLOSION
-
INSTALL
A
FUSE
Battery Banks can deliver very high levels
of
current that
can
vaporize
metal,
start fires
and
cause
explosions.
l3